Looking For Radon Testing Edmonton?

Admirable Inspection Services performs radon testing Edmonton in a timely and professional manner.  Admirable Inspection Services uses state of the art equipment and techniques  to make sure your family is not exposed to the unhealthy exposure of radon gas.  Radon gas is quite common in Alberta and radon gas has even been detected in granite and marble countertops. Have your home tested today by the professionals that care.

radon testing edmonton

What is Radon Testing And Why Do I Need It?

Radon is an odorless, tasteless, colorless, radioactive gas that is produced from radioactive breakdown of uranium in soils. Radon gas breaks down to form other radioactive elements. Being airborne, radon gas and its products can be inhaled. In the lungs, these particles break down further, releasing small bursts of radioactive energy (called alpha particles). These are absorbed by lung tissues damaging them in the process. When cells are damaged, there is an increased risk of developing lung cancer when they reproduce.

Health risks of radon gas

Radon gas exists everywhere in the environment. However, it is a health concern when it accumulates to high levels in buildings because, due to its radioactive nature, exposure to high levels of radon gas increases the risk of developing lung cancer.

Health Canada estimates that about 16% of lung cancers deaths in Canada are attributable to radon.

The risk of developing lung cancer from radon exposure depends on:

  • How much radon you are exposure to
  • How long you are exposed (length of time)
  • Whether you smoke tobacco or not

The risk of developing lung cancer increases significantly  for tobacco smokers.  As an example, the chances of developing lung cancer for a

  • Lifelong smoker: 1 in 10
  • Lifelong smoker + radon: 1 in 3
  • Non-smoker + radon: 1 in 20
Radon guidelines in Canada

In Canada, the concentration of radon in the air is measured in units of Becquerels per cubic meter (Bq/m3). Basically, 1 Bq/m3corresponds to one radioactive disintegration per second in one cubic meter of air.

Health Canada and other government agencies in the world have recognized the risk posed by radon gas.  These governments have developed guidelines for indoor radon levels known as action levels.

An action level is the level of radon at which remedial action (mitigation) is recommended.

In Canada, the guideline (action level) for radon in indoor air is a level of 200 Becquerels per cubic meters (Bq/m3).

This means that radon levels in homes and buildings are recommended to be below 200 Becquerels per cubic meter (Bq/m3).  Any levels of 200 Bq/m3 and above should be fixed (radon mitigation).

Based on this guideline, indoor radon levels are interpreted as follows:

Radon concentrations and recommended action level

Below 200 Bq/m3

No action needed

200 -600 Bq/m3

Mitigate you home within 2 years

Above 600 Bq/m3

Mitigate you home within 1 year

Number of homes with high radon levels (200Bq/m3 and above)

A recent Health Canada study estimates that about 7% of Canadian homes  (~600,000) have high radon levels, above the recommended guideline.


How radon breaks down

The figure on the right shows different chemicals involved when uranium breaks down, eventually forming radon gas and other products (also known as “radon daughters”).

The time periods indicated in each box represents the half-lives of each radioactive element. The half-life is a commonly used measure that quantifies the length of breakdown of radioactive particles. It corresponds to how long it takes for a given amount of each element to break down to half the original amount.

How radon enters a building

The most common source of radon gas is the soil.  Other less significant sources of radon are well water and some building materials that may have some trace amounts of radium and uranium (e.g. some granite counter tops, stone features).

A house can act like a vacuum for gasses that emanate from the soil. The air pressure inside your house is usually lower than in the soil surrounding the foundation. This is a conducive condition for soil gasses like radon to come into a home.

The difference in pressure between the soil and a home can also be caused by natural air movement, particularly in the cold season when warm air from the house moves outside, also known as stack effect.  The use of air exchangers, exhaust fans and clothes dryers can also contribute to this effect.

When air is pushed out of the house, outside air is pulled back in to replace it. Much of the replacement air comes from the ground surrounding the house and brings gases such as radon with it.

Radon gas can enter a house at any place it finds an opening where the house contacts the soil. For instance – cracks in foundation walls and in floor slabs, construction joints, gaps around service pipes and support posts, floor drains and sumps, cavities inside walls, and the water supply.

Radon gas can enter a house at any place it finds an opening where the house contacts the soil. Here are some examples of potential entry points:

  • Cracks in foundation walls and in floor slabs
  • Construction joints
  • Gaps around service pipes and support posts
  • Floor drains and sumps
  • Cavities inside walls

Because radon is a gas, changes in the atmospheric pressure also affect its emission from the ground and its accumulation in indoor air.

The concentration of radon gas in indoor air depends on:

The amount of openings in a house that can let in radon

The strength of radon source in the soil

The ease with which the radon can move through soil and building foundation, walls or any other openings

The ease with which radon gas can move through the soil can be influenced by many different factors; porosity of soil, moisture content in soil, building structure and other factors that affect air pressure differentials.

It is not easy to predict radon levels in a home

Given the number of variables involved, every house or building has unique circumstances that can affect  radon levels. A number of factors can affect radon levels in a building.

Radon levels have also been shown to vary even by next door neighbors. A recently reported case in Quebec shows radon tests done in two neighboring homes, where one home had  radon levels at 125 Bq/m3 and the next door neighbor had 20,653 Bq/m3!

Some people argue that older homes have are more likely to have entry points for radon and thus are at more risk than newer homes. However, newer homes tend to be more tightly sealed for energy efficiency. This means that radon gas can easily accumulate in the new home.

The age of a house is not a good indicator of potential radon levels, both new and old homes are both equally likely to develop radon problems.


Ventilation is the first logical measure that homeowners implement to reduce radon levels. While ventilation can help a bit, research has shown that ventilation can both reduce and increase radon levels.

Ventilation can reduce radon levels through mechanical propagation of radon from indoor to outdoor. Ventilation can also increase radon levels by creating a negative pressure that can cause a suction effect on the soil, thus increasing contribution from radon source.

Radon Testing Your Home Or Business

You can either purchase a DIY radon test kit to conduct a test at your home or hire a certified radon measurement professional to do it for you.

Admirable Inspection Services is a certified provider of radon testing services for Edmonton and surrounding areas. Admirable Inspection Services offers radon testing solutions to residential, commercial and public buildings.

If you live in other parts of Canada, you can find a certified radon professional in your area on C-NRPP’s website.

The only way to know the radon concentrations in your home is to test!

What if radon levels in my home are high?

Radon levels can be reduced in any home for about the same cost as other common home repairs. The price range for mitigation, based on a variety of Canadian mitigation providers, is around $1,000 to $3,000. Ultimately the cost will depend on the unique situation of your home, as well as any performance features that will be installed.

The higher the radon levels, the sooner you should mitigate. For levels between 200-600 Bq/m3 it is recommended to perform mitigation within 2 years, while those above 600 Bq/m3 should be mitigated within 1 year.

Being safe from radon exposure starts with knowing how much radon is in your home or business!

Since we cannot smell, see, or taste radon the only way to know is to test!

Contact Admirable Inspection Services today for your Radon gas consultation

Radon testing Edmonton should be a part of your checklist for air quality testing in the home.

My Promise to You

pre-listing inspections edmontonChoosing the right inspection service provider can be difficult. Unlike most professionals you hire, you probably won’t meet me until your inspection appointment–after you’ve hired. Furthermore, different inspectors have varying qualifications, equipment, experience, reporting methods, and pricing. One thing that’s certain is that a thorough inspection requires a lot of work. Ultimately, a quality inspection depends heavily on the individual inspector’s effort. I guarantee that I will give you my very best.

— Steven Letendre

Admirable Inspection Services